All posts by pekkakamarainen

Blog, Taccle VET (IO4)

Finding strategies to promote digital competences of teachers and trainers – Part Two: Adapting the Four-Step Model for vocational education and training

With my previous blog entry I started a series of posts with which I try to link my work in our EU-funded TACCLE4-CPD project (with focus on vocational education and training (VET))  to the work of other partners in other educational sectors (general education, adult education). As a starting point I presented  the Four-Step Model of the TACCLE4-CPD project that was developed in the recent project meeting in Bucharest (in which I couldn’t participate). I found this model very helpful for finding and developing strategies to promote digital competences.
However, my critical point was that it focused primarily on schools, adult education providers and (general) educational authorities. In this post I will discuss, how the model can be adapted to the field of VET. Below I will follow the steps and make some comments from the perspective of VET.

The starting point: The education and training contexts in the field of VET

As I have mentioned, the Four-Step Model has been developed to support school managers, adult education providers and educational authories – to promote the digital competences of teachers. When shifting the emphasis to the field of VET, it is essential to take into account education and training partnerships between vocational schools, enterprises and intermediate training centres. In such contexts the schools are contributing to the enhancement of digital competences together with the other partners. Moreover, the introduction of digital tools for learning is part of the enhancement of digital competences in the occupational domain.

Identifying policies: educational, occupational and wider societal perspectives

When discussing with my interviewees in the field of VET I have come to the conclusion that there are multiple policies that have an impact on promoting digital competences in the field of VET. In this context it is worthwhile to mention government policies at the national (federal), regional (federal state), sub-regional and municipal level. In addition there are public innovation policies and sectoral stakeholder -led initiatives as well as local partnership-oriented initiatives. From this perspective it is appropriate to look at the VET-specific policy constellations that are being followed.

Identifying strategic initiatives and shaping action plans

In addition to the above-mentioned diversity, it is worthwhile to consider, what kinds of strategic initiatives are available for enhancing digital competences in the field of VET. From the perspective of curriculum design/development it is possible to specify the following options:

  • Introduction of vocational curricula to new occupational domains or reshaping the existing training with a new (whole curriculum) approach;
  • Enrichment of existing vocational learning arrangements with integrative digital toolsets;
  • Enrichment of particular vocational learning arrangements with domain-specific digital tools and web resources;
  • Incorporation of simulated learning opportunities into workplace contexts that do not provide opportunities for on-the job training.

In the light of the above, the educational actors can have very different starting points and strategic options.

The role of a “Routemap” and a “TACCLE handbook” in the field of VET

Considering the above presented comments, it is appropriate to take a closer look at results of the interviews with teachers and trainers and with the working perspectives that they have outlined. Once this has been completed, it is possible to discuss, how these products can be adapted to the field of VET. In my next blog post I will take a first step towards interpreting the findings from my interviews in terms of ‘innovation paths’

Blog, Taccle VET (IO4)

Finding strategies to promote digital competences of teachers and trainers – Part One: The Four-Step Model of TACCLE4-CPD

In my recent posts I have reported of my fieldwork for our EU-funded TACCLE4-CPD project. The aim of this project is to develop training models and pedagogic approaches to promote digital competences of teachers and trainers in different educational sectors. In my blog posts I have mainly emphasised the specific characteristics of my work that focuses on the field of vocational education and training (VET). With this series of posts I will try to link my work to the general framework of the project and to the work of other partners in other educational sectors (general education, adult education) and with school-based learning.
The starting point is provided by the Four-Step Model that was developed in the recent project meeting in Bucharest (in which I couldn’t participate). In this first post I will present the outline of the model (as it was explained to me afterwards) and how it can be applied in schools and adult education providers. In the subsequent blogs I will discuss, how the model can be adapted to the field of VET and to my recent findings in the fieldwork.

The Four-Step Model for finding/developing strategies to promote digital competences

The Four-Step Model for finding/developing strategies was shaped in the project meeting in Bucharest, when the TACCLE4-CPD partners had workshops with interested schools. When analysing the experiences of the workshops the partners came up with the model that is visualised below.

Four-Step Model of TACCLE4-CPD

Figure 1: The Four-Step Model for finding/developing strategies to promote digital competences in educational contexts (credit to Graham Attwell and Angela Gerrard)

As we see, the left hand side presents the process steps with key questions and related options, how to proceed. In the middle we see the reference materials that can be used in the process. And on the right hand side we see the underlying questions that clarify, where the questions and answers lead us.

My interpretation of the four-step model (as it stands now)

As I read this model, it speaks out to school managers, educational authorities and curriculum developers. They are challenged to consider, whether their organisation(s) is/are following a policy for promoting digital competences. In this respect they are advised to inform themselves of the European DigCompOrg frameworks (prepared by the Joint Research Centre (JRC) of the European Union). In the next phase they are challenged to consider their strategic approach in terms of action plans and needs analyses. Here they are advised to have a closer look at the DigComgEdu framework (also by JRC) for specifying their strategic orientation. Then, in the next phases the model invites to discuss, how continuing professional development (CPD) can be organised and delivered. Here the model refers to  earlier TACCLE resources (Routemap) and to the new Handbook that is being prepared for the TACCLE4-CPD.

—

As I see it, this model suits very well school-based educational contexts. However, when we discuss the field of VET, we are dealing with a more complex policy environment and institutional/organisational landscape. Moreover, we are dealing with diversity of learning venues (schools, enterprises, intermediate training centres) and with domain-specific characteristics (different occupational fields, different production and service contexts). Therefore, it is appropriate to discuss the Four-Step Model in the light of these challenges. That is the task for my next blog post in this series.

Blog, Taccle VET (IO4)

Trainers’ views on introducing digital tools to vocational learning – Part Three: Insights into special areas of learning

With my previous post I started a series to report on interviews with vocational teachers, trainers and supporting researchers or consultants for the TACCLE4-CPD project. The project seeks to develop  continuing professional development (CPD) of teachers and trainers – with focus on enhancing digital competences. As I have mentioned, my work concentrates on the field of vocational education and training (VET). In my two previous posts I have summarised some of the pedagogic points raised by the trainers and their general views on the use of Learning Toolbox (LTB) as support for apprentice training.

With this third post I want to draw attention to the role of LTB as support for two special areas of learning. Here I am reporting directly from an interview with an expert partner in health and safety and in supporting language learning on foreign apprentices. Here it is worthwhile to note that in both areas the use of LTB was started at the end of Learning Layers (LL) project and the trainers of Bau-ABC have been developing their own solutions.

Using Learning Toolbox (LTB) to support training in health and safety

Concerning the area of health and safety, trainers from different trades worked as an informal working group. This effort supported the creation of a coherent LTB stack and helped the trainers to prepare their domain-specific instructions in a coherent way. Now, that the trainers and apprentices in all trades are using LTB, it makes the health and safety material present in a new way – it is no longer info sheets in a folder. The LTB can be accessed by trainers and by apprentices at any time. This has helped to make the training in health and safety more creative and situation-adjusted – as lived practice.

Using Learning Toolbox (LTB) to support foreign apprentices’ language learning

The LTB-stack to support Spanish apprentices in learning occupational vocabulary has been created together with trainers and an external language teacher. It has been enriched with quiz tasks that have made the learning more exciting. Also, this stack has included health and safety terminology. The stack has been helpful in preparing the apprentices for their tests and it will be developed and updated regularly. The usability has been greatly enhanced by the fact that Spanish is provided by LTB as an optional language.

—

I think this is enough of these examples. Altogether these interviews have given me a good feeling that the main result of our joint LL project – the Learning Toolbox – has been used actively. Moreover, it has become clear that the LTB has not been whatever digital tool among others. Instead, in the context of vocational learning it has proven to be a strategic toolset to promote digital competences and to enhance vocational learning. But we need to work further with these themes.

Blog, Taccle VET (IO4)

Trainers’ views on introducing digital tools to vocational learning – Part Two: General views on the use of Learning Toolbox

With my previous post I started a series to report on interviews with vocational teachers, trainers and supporting researchers or consultants for the TACCLE4-CPD project. The project seeks to develop  continuing professional development (CPD) of teachers and trainers – with focus on enhancing digital competences. As I have mentioned, my work concentrates on the field of vocational education and training (VET).  I  still have some interviews on my list. Yet, it has been helpful to write down some points raised by full-time trainers of the training centre Bau-ABC. In this second post I will draw attention to the use of the digital toolset that we have co-developed in the Learning Layers project. I will start with the transition from the common project work to using the main product after the project.

Getting clarity on terms of service and permissions to use the toolset

The Learning Layers (LL) project had been a wide trans-national research and development (R&D) project in which many research partners, technical partners and application partners had been involved. During the long funding period they had co-designed, co-developed and pilot tested digital tools to support learning in the context of work. The digital toolset Learning Toolbox (LTB) was the main product that was developed in the Construction pilot of the LL project. After the project the LTB-developer team launched a start-up company (StackServices) to develop the LTB further and to support user organisations. This provided the basis for further use of the toolset after the project.

After the funding period the service provider has developed a differentiated set of contracts and permissions to regulate the use of the LTB software, the use of the LTB platform and the use of the services of the LTB-developers.

Shaping common structures for trade-specific LTB-stacks and overarching themes

In the LL project the LTB was shaped as a digital toolset that provides stacks (consisting of different kinds of tiles) for the users. During project the trainers who participated in the pilot testing developed their own stacks for their own apprentices and based on their own pedagogic priorities. After the project the trainers have developed a common structure for trade-specific stacks and for overarching themes. Also, they have coordinated the filing of digital worksheets and of photos. Thus, they have common patterns to work with the LTB.

Using LTB to enhance vocational (work process -oriented) learning

In the LL project the use of LTB was adjusted to the apprentices’ learning projects (that were shaped from the perspective of holistic look at planning, task preparation, task implementation and assessment). The learners were guided to self-organised (individual or team-based) learning. Whilst the LTB was at that time used mainly as trainers’ tool to provide guidance and instructions, it is now increasingly used as apprentices’ tool to report on their projects. Moreover, the use of specific Apps like GoConqr quiz apps has considerably enriched the learning process.

In particular LTB has served well as a central channel to essential web resources, such as the norms or regulations (as summaries) that need to be taken into account in construction work and to users’ guides for machinery and vehicles (also as summaries).

Using LTB from the perspective of apprentices

In all the interviews I got the picture that the apprentices have received well the use of LTB – once they have got the login sorted out and created their own account. The WLAN functions better and there are tablet PCs available at the training workshops. Via LTB the apprentices get advance information on the forthcoming training projects with which they will work during the next presence period in the training centre. When they are working with the projects the LTB serves as a documentary toolset for recording the interim results and final results. Moreover, the apprentices can check whether they are working correctly and eventually ask for advice (with reference to their photos etc.). And if something is not quite right, they can take the necessary measures and update their documentation. However, the final reporting with the apprentices’ portfolio reports has not yet been digitized – that is depending of training regulations (not  a matter for local decisions).

—

I guess this is enough of the general picture on using Learning Toolbox as support for training. In my next blog I will discuss the relevance of Learning Toolbox for two overarching learning areas – training and learning in ‘health and safety’ and support for learning German as foreign language (with focus on domain-specific vocabulary in construction sector).

Blog, Taccle VET (IO4)

Trainers’ views on introducing digital tools to vocational learning – Part One: Trainers’ reflections on craftsmanship and pedagogy

During the last few weeks I have been doing interviews with vocational teachers, trainers and supporting researchers or consultants for the TACCLE4-CPD project. In this project we focus on continuing professional development (CPD) of teachers and trainers in order to promote their digital competences. Here, the main point of interest is to find appropriate uses of digital tools and web resources in order to enhance the quality of learning. My contribution to the project is to provide analyses from the field of vocational education and training (VET) and to develop models and materials for CPD measures in the field of VET.
I am still in the middle of the interviews but I find it appropriate summarise some first impressions from my discussions with trainers in the vocational training centre Bau-ABC with which we have worked together several years. In this first post I will take up some pedagogic points on the role of digital tools in craft trades and vocational learning.

Craftsmanship vs. use of digital tools

In many interviews the trainers pointed to the traditional idea of craftsmanship – to make something with your own hands. This refers to the sense of working with manual tools, to feel the materials with your own hands and to be able to assess the quality with your own senses. From this perspective older trainers and craftsmen have often reservations regarding the use of digital technologies as support for working and learning: “That’s how we have always done these things …”. Also, the introduction of stand-alone tools and apps has not always been successful. Moreover, may allegedly user-oriented apps or instruction videos are not of sufficient quality  to support learning. Furthermore, when introducing new technologies, there is often an anxiety that this brings more work to the trainers or craftsmen – instead of offloading them.

In the light of the above it is important to approach the trainers and craftsmen with solutions that work in practice and support working and learning in their trades.

Vocational learning vs. use of digital tools

Concerning the newer generations of apprentices, it is worthwhile to note that they have been less exposed to manual work, getting in touch with the materials and working with traditional tools. Moreover, their computing skills tend to concentrate on operating their smartphones. This provides a challenge for trainers and craftsmen – how to incorporate the use of digital tools into vocational learning without transforming the learning process into a virtual world

In the light of the above it is of vital importance that the use of digital tools shall serve the planning, preparation, implementation and assessment of work process -oriented learning. And the role of digital tools is to deepen the understanding of one’s learning – not as a short cut to answers provided by someone else. This is in particular the case when using digital tools with the cross-cutting theme ‘health and safety’ at work.

Thoughts on the future of craftsmanship

At the end of the interviews we shifted the emphasis from promoting digital competences in the current craft trades to a bigger picture of digital transformation through entire production, service and marketing networks. In the public debate we see often the dominance of negative scenarios that anticipate redundancy of craftsmanship and replacement of human workforce by robots, advanced automation and ‘internet of things’. From the perspective of their own trades the trainers made the following points that outline new possibilities for advanced craftsmanship:

  • Concerning carpenters, there will always be a need for advanced craftsmanship in the renovation of traditional buildings. Parallel to this, thanks to the new construction techniques, wooden constructs are being used as the structures of high buildings. Moreover, even when human workforce can be replaced by robots, this can be used as a basis for new complementarity in which craftsmen are engaged in creative tasks and robots in heavy tasks.
  • Concerning well-builders and tunnel-builders, there are new possibilities for using geo-data and advanced sensors and new techniques for drilling.  Yet the risk analyses, when starting drilling (horizontal or vertical) require communication between craftsmen on the site and authorized experts.
  •  Concerning welding, the use of welding robots is widespread in the industries. Yet, in outdoor construction work in which the results should sustain heavy strain and climate changes, it is essential to have a good understanding of materials, circumstances and differences in the quality of work. The sensors of welding robots may not be in the position to guarantee the required safety and sustainability.

—

I guess this is enough of these aspects. I still have some interviews listed for this week. If needed, I will update this post with further post. However, in my next post I would like to discuss, how the trainers commented the usability of the Learning Toolbox as a digital toolset to support work process -oriented learning.

Blog

Field visit in the region with a group from Namibia – Part Two: Getting ideas for future-oriented training

In my previous post I reported of a field visit to regional training provider organisations with a prominent delegation from Namibia. I joined the group partly because I needed to arrange meetings with vocational teachers and trainers from both organisations. With the help of these meetings I wanted to revisit the materials from the training activities of the EU-funded Learning Layers project (2012-2016). My aim is to develop with a future-oriented training concept for promoting digital competences of teachers and trainers in vocational education and training (VET).  With the trainers in the training centre Bau-ABC I can refer to our shared experience in implementing training schemes during the Learning Layers project and to the introduction of the digital toolset Learning Toolbox (LTB). With teachers of BBS Wildeshausen I was interested of other pedagogic solutions and of the use of Open Educational Resources (OER). These all should be taken on board when preparing the support materials for developing continuing professional development (CPD) to promote digital competences of teachers and trainers in the field of VET.

When listening to the contributions of the teachers and trainers during the field visit I got more and more convinced that such materials should not be shaped as overarching ‘encyclopedia’ of digital tools, web resources and mobile apps. Also, I understood that the materials should not be written in the style of cookbooks with ready-made recipes. Instead, they should be well-selected and contextualised exemplary stories that inspire the readers to find their own solutions.  And these solutions should give a picture, how to use appropriate toolsets and web resources for the respective vocational learning environment. Also, these materials should open the perspective to using digital tools and web resources from the initial steps to first strategic choices and to wider use of tools, resources and complex teaching-learning arrangements.

From this perspective I started to outline an updated and extended training model based on the “Theme Room” metaphor that we used in the Learning Layers project. The ‘theme room’ can refer to a physical space or to a virtual space that has been made available for a selected theme and for a flexible time frame. Once the participants have completed the learning tasks and checked themselves out, the theme rooms can be furnished with other themes. That was the original idea.

Below, inspired by the impulses from the field visits I would like to outline a rough draft for an updated “Theme Room” structure:

Theme Room 1 – Entrance lobby: Getting used to work with some basic digital tools and apps – with the aim to make use of them in one’s own teaching or training activities.

Theme Room 2 – Starting points for working with integrative digital toolsets: Brief introductions to integrative toolsets that are appropriate in vocational learning contexts – such as the Learning Toolbox or the Kompetenzwerkstatt toolsets.

Theme Room 3 – Using enriching web apps and platforms: Working with apps, tools and platforms that help to make learning tasks more inspiring and challenging – such as the toolsets provided by Go Conqr and H5P platforms.

Theme Room 4 – Working with complex teaching-learning arrangements: Insights into learners’ projects that involve construction of new tools/devices or manufacturing of new products that can be used in learning contexts.

Theme room 5 – Using the digital toolset “Learning Toolbox” to support vocational learning processes: Insights into the use of Learning Toolboox as an instrument for delivering training and for promoting self-organised learning.

Theme room 6 – Using the digital toolset “Kompetenzwerkstatt” to support vocational education and training processes: Insights into different Kompetenzwerkstatt tools that raise learners’ awareness of their progress in vocational learning.

Theme room 7 – Using Open Educational Resources (OER) to support vocational learning processes: Insights into the work of OER-communities (and support agencies) and into their services.

…

Theme Room n – Workshops on the options for digital transformation in one’s own domain: Whilst enhancing one’s own digital competences in the context of vocational learning tasks or project, it is necessary to keep an eye on the big picture of transformations in entire production and services processes & networks.

—

I guess this is enough for a rough structure. As I said, this should not be seen as a basis for a ‘cookbook’ or for a ‘product catalogue’ but as an introduction to explorative learning in order to find one’s own solutions and in order keep oneself on track with new developments. This is the challenge – there is work to be done in the meetings with teachers and trainers.

Blog, Types and Styles of Training

Field visit in the region with a group from Namibia – Part One: Fresh impressions from the field

This week our institute – Institut Technik & Bildung (ITB) of the University of Bremen – has hosted a study visit of a prominent delegation from Namibia. This study visit is part of a cooperation process that has been started with smaller steps and now there is an ongoing discussion, how to deepen the cooperation. As I have not been involved in these discussions I leave it to my colleagues and to the Namibian authorities to find the bast ways forward.

As a part of their program the delegation visited on Tuesday two interesting organisations in the nearby region. With the training centre Bau-ABC I had had active cooperation for many years in the EU-funded Learning Layers project. But in the follow-up phase I had only had a chance to make some occasional visits. As a contrast, I had not visited the vocational school BBS Wildeshausen before. Instead, I had had several conversations with one of the teachers who is also working in several projects of our institute. By joining the study visit group on Tuesday I had a chance to catch up with newer developments in Bau-ABC and to get live impressions from BBS Wildeshausen (of which I knew only via our talks in Bremen). Below, I will give a brief account of the visits in both places. In my next post I will outline some conclusions for my work in the ongoing EU-funded project TACCLE4-CPD.

Visiting the training centre Bau-ABC Rostrup

At the training centre Bau-ABC Rostrup the delegation was interested in finding out, how such an intermediate (industry-supported) training centre has been embedded into the dual system of vocational education and training (VET). Here, the representatives of host organisation were able to give a picture of the mutual agreement of the Social Partners (employers’ confederations and trade unions) that such an intermediate learning venue was necessary in the construction sector. Likewise, they could explain funding arrangements and the organisational setting via which the industry and the craft trade companies were supporting the training centre. In addition, the visitors got a picture of the role of the training centre at different phases of apprentice training. Finally, the visitors got insights into the continuing vocational training (CVT) that provide a vocational progression route to managerial qualifications in the construction sector.

During our round tour at the workshops and outdoor training areas we could see, how the pedagogic ideas were put into practice.  We got impressions of apprentice training via holistic occupational work processes, of learners’ rotation from major learning areas to supporting areas and of the patterns of self-organised learning. In particular we had a chance to see, how a digital toolset (the Learning Toolbox) was used in delivering instructions and collecting apprentices’ project reports. Here we could see that  results of the EU-funded Learning Layers project were actually used to support training.

Visiting the vocational school BBS Wildeshausen

The second part of the visit was somewhat different, because only some teachers of the BBS Wildeshausen were present (the school holiday period had already started). Yet, we had a good possibility visit the integrated vocational learning facilities of different occupations. In Wildeshausen the school architecture had abolished the separation of classrooms, workshops and laboratories and instead provided integrated spaces. This was already a great support for integrating theoretical and practical learning. Yet, the major innovations that were presented to us were in the pedagogic sphere.

When describing the learners’ projects the teachers drew attention to the role of real occupational tasks and to controlling the quality by the learners themselves. Moreover, some projects engaged the learners in constructing devices that were needed in their training or in manufacturing products that could be used in the training. In the agricultural and automotive workshops we saw vehicles that had been constructed by nearby industries to make the functioning of the machinery more transparent (and to give easier access for diagnostic measures and repair work.

—

I guess this is enough of the observations during the field visit. The visitors from Namibia were very impressed and inspired. Since they were in a process to start new cooperation activities, the visit gave a lot of food for thought. As for me, I had joined them to make appointments with Bau-ABC trainers and teachers in BBS-Wildeshausen to discuss the next phase of my work in the TACCLE4-CPD project. And in this respect this was a very productive and helpful field visit. I will discuss my ideas and interim conclusions in my next post.

Blog

Catching up with the TACCLE4-CPD project – Part Three: Drawing conclusions for future-oriented training

With my previous posts I have started a series of blogs that present my contributions to our ongoing TACCLE4-CPD project. In this project we are looking at concepts and models for  continuing professional development (CPD) of teachers and trainers with emphasis on promoting their digital competences. In my first post I reported on the document that I had  produced for our policy analyses (with emphasis on the field of vocational education and training (VET)). In the second post I presented my starting points for revisiting our predecessor projects – the three earlier TACCLE projects with focus on classroom teachers and the Learning Layers project with focus on vocational and workplace-based learning.

In this post I want to present a summary of my results – conclusions for future-oriented training (with emphasis on the field of VET):

“Looking back at the project histories (of the predecessor projects) it becomes clear that the project teams have been able to ‘hatch out’ of the original scripts and face challenges that were not anticipated in the proposed work plans. Therefore, it is appropriate to consider the past training concepts as impulses for a future-oriented training approach – instead of taking them as ready-made models to be replicated. In particular this is important when discussing the value of the legacy of prior TACCLE projects and the Learning Layers project for future work in the field of VET.

From this perspective it is worthwhile to pay attention to the following differences between the training concepts in the early TACCLE projects and the Learning Layers project (and its Construction pilot):

  • For the TACCLE projects the key instruments for promoting the teachers’ digital competences have been the TACCLE handbooks. The TACCLE courses have been closely linked to the preparation of the handbooks and to use of their contents.
  • For the Learning Layers project (and its Construction pilot) the key instrument for promoting trainers’ and apprentices’ digital competences has been the digital toolset Learning Toolbox. The training campaigns that were implemented in earlier phases of work have served as preparatory phases. However, when looking at future-oriented training for trainers, the role of such toolsets as support for vocational and work process -oriented learning needs to be taken into account.

In addition to the above-mentioned points it is necessary to consider the twofold meaning of ‘digital competences’ in the context of VET. As has been emphasised in recent studies (see Sloane et al. 2019 and Gessler & Ahrens 2019), this concept refers to mastery of ‘digitisation’ at the operative level and to mastery of ‘digital transformation’ at the level of work processes at organisational level (and across production, supply and service networks).

From this perspective it is appropriate to revisit the ‘theme room’ approach from the perspective of bringing together different training impulses and addressing different training needs with the help of different instruments to promote training and learning.

Here, it is possible to build upon the success factors of the TACCLE and Learning Layers projects. Yet, it is necessary to take into consideration critical issues and challenges that emerge in the current work with digital tools in education and training. In this respect it is possible to outline the ‘cornerstones’ of a future-oriented training model on the basis of the training concepts of TACCLE and Learning Layers projects (in particular with reference to the ‘Theme Room’ and the peer tutoring in the introduction of the Learning Toolbox). However, this legacy needs to be enriched with new experiences in the field.”

So, I have taken the course to update the “Theme Room” model and to enrich it with newer experiences from the field of VET – in particular regarding the the use of digital toolsets like the Learning Toolbox and taking into account different meanings of ‘digital competences’. There is work to be done.

Blog

Catching up with the TACCLE4-CPD project – Part Two: Revisiting the legacy of the prior TACCLE and Learning Layers projects

With my previous post I started a series of blogs that report on my recent contributions to our ongoing TACCLE4-CPD project. As I mentioned, we are looking at concepts and models for  continuing professional development (CPD) of teachers and trainers with emphasis on promoting their digital competences. In my previous post I reported on the document that I had  produced for our policy analyses (with emphasis on the field of vocational education and training (VET)). With this post I want to draw attention to the predecessor projects – the three earlier TACCLE projects with focus on classroom teachers and the Learning Layers project with focus on vocational and workplace-based learning.

Below I present my starting points for revisiting the legacy of the predecessor projects:

“This document has the task to revisit training concepts that were (at least intuitively) developed and put into practice in the series of TACCLE projects (starting from 2007 on and continued to recent years) and in the Learning Layers project (starting from 2013 on and continued till the end of 2015). The document has been prepared for the current TACCLE4-CPD project that develops models for continuing professional development (CPD) based on the experiences of prior TACCLE projects and affiliated projects. From this perspective the revisiting exercise serves the following purposes:

  1. The main point of interest for revisiting the prior TACCLE projects is to clarify, how the projects responded to the development of digital tools and web resources and how this was taken into account in the project activities. In particular it is essential to see, how the training activities provided impulses for shaping the successor activities of the on-going projects.
  2. The main point of interest in revisiting the Learning Layers (LL) project history is to give a picture of the multiple activities and different project phases. Here, it is essential to see, how the work in the Construction pilot grew together with focus on the development of the Learning Toolbox (LTB).
  3. When comparing the project histories of the TACCLE projects and the LL project, the main point of interest is to find out, how the training activities (alongside the project work) were related to the end products with which the projects were working. Here it is worthwhile to note the differences between TACCLE courses and the training campaigns during the LL project.
  4. In the light of the above-mentioned differences it is essential to have a closer look at the impulses for the development of a transfer-oriented training model that we can trace from different phases of the LL project. Here, it is equally important to have a look at the training/learning activities as well as the co-design and pilot testing of new digital tools.
  5. Finally, it is necessary to consider, how the TACCLE and Learning Layers projects have grown out of their initial scripts and responded to newer challenges that they have met during the project work. In particular it is essential to reflect, how the Learning Layers’ experiences on training the trainers and co-design of new digital toolsets have enriched idea of promoting digital competences.

Based on these explorations the document draws conclusions on the importance of project histories as a basis for CPD concepts that seek to promote digital competences of teachers and trainers – in particular in the field of VET.”

So, this is how I started my revisiting journey. In my next post I will summarise my interim conclusions.

Blog

Catching up with the TACCLE4-CPD project – Part One: New version of policy analyses

During the last few weeks – after getting my computer problems sorted out – I have tried to catch up with my duties for our ongoing EU-funded TACCLE4-CPD project. As I have told in my blogs last year, this project is looking at concepts and models for promoting continuing professional development (CPD) of teachers and trainers with emphasis on digital competences. The project builds upon a series of TACCLE projects that worked with classroom teachers.
Now, the challenge is to develop CPD models for wider use – including also adult education (AE) and vocational education and training (VET). In particular the extension of the scope to the field of VET provides a challenge since this brings into picture different governance models, different training providers and different learning venues.

In the light of the above I have written a document with the heading “Policy analyses as background for continuing professional development of teachers and trainers in the field of vocational education and training (VET)”.  Here I share a summary of my interim conclusions:

“This document was started with an overview of educational governance and steering models in the field of vocational education and training (VET). After a rough overview a closer look was taken on the specific features of federal governance and dual system of organizing VET in Germany. As we have seen, the picture of policies promoting digital competences has remained somewhat patchwork-like.

The third section has given a closer picture of local educational and VET contexts as well as of recent R&D projects. These descriptions have given an understanding on the state of the art and of pioneering initiatives. Also these descriptions have given a picture of a patchy landscape of local developments. From this perspective it is worthwhile to ask, what kind of role integrative frameworks can play and how they can be shaped.

The European “DigCompEdu” framework was presented in the fourt section. It differs clearly from European Qualification Framework (EQF) or European Frameworks for Credit Transfer (ECTS and ECVET) or from  European Quality Assurance mechanisms. This framework is not paving the way to intergovernmental agreements with signatory states. Instead, it provides practical assistance for linking digital tools and enhancement of digital competences to different learning contexts.

However, from the perspective of the VET sector, the DigCompEdu framework remains very generic. Yet, in this sector, there are very specific challenges for promoting digital competences. Therefore, the framework study of the project Berufsbildung 4.0 starts with a useful differentiation between ‘digitisation’ (at operative level) and ‘digital transformation’ (at the level of whole organisations and networked production/service processes). Taking into account both levels the project is looking for development perspectives for future-oriented VET provisions. From these starting points the project has worked with several theses and feedback workshops and synthesised the results in transversal themes and analyses that focus on different levels or educational steering and change management.

Altogether, the above-presented sections provide very heterogeneous impulses for anyone, who wants to grasp the essence of policy processes and their impact on policy implementation in the field of VET. Yet, the impulses, insights into field and explorations on framework documents or framework studies need to be considered when taking further steps in shaping continuing professional development of teachers and trainers. For this purpose the next working document is looking more closely at developments in the previous TACCLE projects and in the parallel project Learning Layers. Both projects have a history in developing training for teachers and trainers. Now it is time to put these developments into a wider European picture.”

These were my interim conclusions from the ‘policy analyses’ with which I tried to provide a background understanding for discussing the theme ‘promoting digital competences’ in the field of VET. This takes me further to the next document with which I have been working recently – but that is already a topic of its own.