All posts by pekkakamarainen

Blog, Taccle VET (IO4)

New videos on innovative use of Learning Toolbox in vocational learning

In my latest post on this blog I reported on the new Support pages for users of Learning Toolbox (LTB) and Demonstration page with brief introduction and a video presentation. At the end of the post I mentioned that the developers of the LTB had also published three new videos that present innovative use of the LTB in the apprentice training of Bau-ABC Rostrup for different construction trades. These videos had been produced for promoting the use of LTB among other similar training centres in Germany. Therefore they are (for the moment) only available in German. All three videos are available on the following web page: https://support.ltb.io/fallvideos-learning-toolbox-im-bau-abc-rostrup/

Below I present some screenshots of these videos and then give a nutshell summary of the key messages that are conveyed by the respective videos.

Apprentice Jonas reporting on his carpenter’s project with the help of LTB

The two screenshots demonstrate, how apprentice Jonas documents an interim phase in his project in carpentry with the help of the LTB-app on his mobile phone. He takes a photo, gives it a title and then uploads it into the LTB-Stack of his trade as contribution to the current project. The trainer, who is supervising the project gets a notification and sees immediately from the LTB-Terminal in his office, what Jonas has reported and what he has to do in the next phase.

Apprentice Jannis using LTB in the context of masonry

Here the two screenshots demonstrate, how apprentice Jannis uploads the instructions for his new project in masonry by reading the QR-code from a mini-poster with his LTB-app. Firstly he synchronises the LTB on his tablet with a Leica-app on aseparate device. Then he takes a picture and edits it with a line and then takes measures with the laser of the Leica-app. At the end he shows the completely edited picture with all the necessary measurements with explanations in the picture. All this has been achieved with the help of the LTB-app on his tablet PC.

Using the shared LTB-terminal as support for trainers and apprentices in the trade of carpentry

The third video presents the LTB-terminal that has been developed for the training of carpenters – one terminal at the office of the supervising trainers and the other as a ‘kiosk’ to be used by the apprentices at the carpentry workshop. The following screenshots give insights into different potentials of the LTB-terminal.

The first two pictures show that the LTB-terminal (whether in the office or at the workshop) provides access to the training contents of the respective trade firstly as an overview on the whole training year and then at the level of particular projects. In this context it is worthwhile to note that the apprentices can compile their individual learning logs (consisting of completed projects) throughout their training and save them in their own project spaces of the respective LTB-stack. In this respect the LTB has provided a digital solution for the former paper-based White Folder of the training centre Bau-ABC Rostrup.

As further support for training and learning the LTB-terminal provides additional resources. Above the first picture demonstrates the ‘dictionary’ (Lexikon) space of carpenters. It provides overviews on training materials, health and safety and other apps that are being used in the training. All this information is based on reliable sourcesand has been validated by the responsible trainers. The second picture demonstrates the 3D-viewer for carpentry that gives multiple insights into wooden constructions.

I think this is enough of these videos. As I see it, the trainers and apprentices have made great progress as users of the LTB. Thus, the toolset (with these further user-initiated additions) has made its case as support for vocational and workplace learning in the construction sector. Moreover, it is worthwhile to follow the further developments in the field.

Blog

New instructions for (new) users of Learning Toolbox

My recent posts on this blog have focused on the digital toolset Learning Toolbox (LTB) that was developed in the EU-funded Learning Layers (LL) project to support vocational and workplace learning. At this point it is worthwhile to mention that the developers of the LTB have made good use of the quiet period when they have not been able to travel to visit interested partner organisations and run face-to-face workshops with new users. So, instead, they have prepared new introductory web pages and demonstration pages for the time when they can activate their contacts again. Below I want to give insights into the main introductory page (available in English, German and Spanish) and into a demonstration page (available in German).

Support page for new users of the Learning Toolbox

As I see it, the new support page for new users speaks for itself (see below two screenshots and links to the respective pages)

Here you have the link to Support page in English: https://support.ltb.io/

And here is the link to the Support page in German: https://support.ltb.io/wie-konnen-wir-ihnen-helfen/

Insights into the demonstration page on uses of Learning Toolbox (in German)

In a similar way the demonstration page – “Introduction to the Learning Toolbox in one minute” speaks for itself. Below you find four screenshots of the introductory texts (the one minute information package) and then a longer video presentation (slideshow with audio introduction and subtitles in German).

Here is the link to this demonstration page: https://support.ltb.io/learning-toolbox-kurz-und-knapp/

The video presentation gives more detailed information on the use of Learning Toolbox in vocational and workplace learning with an audio slideshow. Here we have four screenshots that give insights into the contents.

I think this is enough of these introduction and demonstration pages. In my next post I will discuss further videos that demonstrate innovative use cases of Learning Toolbox in specific construction trades.

Blog

Updates on the corona crisis – What news from field activities with the Learning Toolbox?

In some of my recent posts I have discussed the impact of the corona crisis on education, training and learning as well as on conferences that are of interest to us. In my latest blogchat session with developers and promoters of the Learning Toolbox – Gilbert Peffer and Werner Müller – I was able to get more insights into the current activities in the field: What is happening currently with the use of LTB to support education, training and learning during and after the lockdown period? What is happening with the use of LTB as support for conferences that are being organised as online events? I will start with the conferences and then proceed to the field activities in education and training.

What news on the use of Learning Toolbox (LTB) in conferences

As I have told in my recent posts (on the impact of the Learning Layers project), the Learning Toolbox (LTB) was developed primarily to support vocational and workplace learning. However, a very successful spin-off prospect emerged when LTB was used to prepare ePosters (supported with mini-posters on poster walls or cubicles). This kind of complementary use of ePosters alongside other modes of presentation started to spread already before the corona crisis.

Now that many conferences have sought ways to convert face-to-face events into online events, the prospect of using ePosters as a major solution has been taken up by several conference organisers. Here, new arrangements have been made to keep the ePosters visible online already during a pre-conference period. Then, during the actual conference period, particular sets of ePosters have been discussed in batches in online sessions. Now this mode of work is taking up and will probably sustain even after the exceptional period. For the developers and key promoters of LTB this has reduced travelling to conference venues and participation in face-to-face events. Instead, they have done more online tutoring and customisation of the use of LTB with supporting online communication services.

What news on the use of Learning Toolbox as support for vocational and workplace learning

Whilst the lockdown has given a push to conference organisers in finding new solutions to prepare online events with larger scale, the picture in the field of vocational education and training (VET) varies. As we have seen it, the transition from classroom teaching into online learning has been implemented rapidly in general education and higher education. For vocational and workplace learning such a transition has not been an easy exercise. In particular the intermediate training centres (that support work process oriented learning in simulated learning spaces) have gone through hard times. In Germany these organisers have been interested in promoting the use of LTB in education and training. Now, due to the lockdown, some advanced training centres – in particular the training centre Bau-ABC Rostrup – have managed to provide LTB stacks to support independent learning of apprentices during the closure period. However, in other training centres the lockdown has interrupted the process of getting a core group of trainers to promote the use of LTB in several trades. Moreover, the reopening of the centres just before the examination period has provided additional challenges.

What conclusions for the TACCLE4 Multiplier Event?

I think these were the most important messages that I need to share in my blog. In addition to these general impressions I had some further thoughts concerning the designed Multiplier Event of the ongoing TACCLE4 CPD project that we want to organise by the end of the project. As I see it know, it is not likely that we can organise it as a face-to-face event – whether before the summer holiday period or shortly after it. And since we need to organise an online event, we still have to think about the arrangements and the timing.

As we have a short time to complete the tasks for the project, we need to opt for a prerecorded webinar or a series of short webinars. And with this arrangement we need to think of a flexible mode of participation  within a flexible time frame. In this way we can probably adjust this event to the time constraints of the designed participants – teachers and trainers in the field of VET. As we have seen it, it is essential to provide new impulses at a time when the potential participants have time and energy to work with the content we provide for discussion.

These were my preliminary thoughts. I need to have further discussions with my colleagues who are supporting me in the TACCLE4 CPD project. Let us see where we can get in the coming times.

Blog

Reflections on the impact of the Learning Layers project – Part Four: What all has contributed to the sustainability of the Learning Toolbox?

With my three previous posts I have started a series of blogs that report on the discussions of former partners of the Learning Layers (LL) project on the impact of our work. The discussion started, when I published a blog post on the use of Learning Toolbox (LTB) in the training centre Bau-ABC to support independent learning while the centre is closed. This triggered a discussion, how the digital toolset Learning Toolbox – a key result from our EU-funded R&D project – is being used in other contexts. This then gave rise to collect such experiences and to start a joint reflection on the impact of our work.

In the first post I gave an overview of this process. In the second post I presented the main points that I and my co-author Gilbert Peffer outlined on the use of LTB to support vocational and workplace-based learning in the construction sector. In the third post I gave insights into the use of LTB in other contexts based on spin-off innovations and on refocusing the use of the toolset. With this concluding post I try to summarise – from my perspective – what factors have contributed to the sustainability of the Learning Toolbox. Here I will make use of some aspects that were outlined for the authors of particular case studies that were brought together in our joint discussion. The points that I present below reflect the views of me and my co-author Gilbert Peffer on our experiences with the construction pilot of the LL project and its follow-up phase.

Strong focus on co-design and stakeholder engagement

As we see it, the co-design, pilot implementation and wider deployment of LTB in the training centre Bau-ABC Rostrup underlines the importance of well-functioning research & development dialogue. Many elements in the project design of Learning Layers provided favourable starting points – e.g. the emphasis on co-design practices, iterative processes and flexible teamwork. Yet, during the work, the partners had to find their ways – time and again – to adjust the guiding principles, the practical pedagogic orientations and possible software solutions to each other.

Flexible collaboration between partners during the follow-up phases of the project

By the end of the project it was not certain, in what ways the innovations could be sustained and the collaboration between researchers, technical partners and practitioners could be continued. From this perspective it was essential that the developers of the LTB and the accompanying researchers from research institute ITB  took several initiatives to launch follow-up activities with partner organisations  in the construction sector. These efforts were not always successful in terms of acquisition of new funded projects. Yet, they provided new insights into potential use of the LTB in organisational contexts and between dispersed work processes.

Rethinking the contextual opportunities and applying technology in previously unforeseen contexts

Due to many intervening factors the progress with the follow-up activities had not been a direct process of  scaling up the innovation. Instead, the interested partners have had to find new paths for working further with the Learning Toolbox in new contexts. Partly the success in using Learning Toolbox in vocational training and partly the spread of using ePosters in conferences have inspired new users. Partly the feasibility studies in the construction sector have opened new prospects for using Learning Toolbox for organisational knowledge sharing – as has been the case latterly in the healthcare sector.

Shaping of R&D projects as innovation hubs/ platforms

On this point our experiences suggest a common success conclusion: R&D projects should not be understood and planned out as mere research studies. Neither should they be looking for allegedly integrated solutions (‘one size fits all’, ‘one format suits all’). Instead, they should rather be shaped as networked innovation hubs or platforms. In such context research elements can receive initial validation and a team to start an innovation process. As we see it, the strength in the construction pilot of the LL project was the continuity of a participative research & development dialogue that kept the processes vivid and helped to overcome difficult periods. Moreover, the multiple support activities helped the practitioners to take ownership of the innovation and become multipliers of new practices.

I think that this is enough of our reflections for the moment. I will get back when we know, on what forum and in what way we will be presenting our joint findings and conclusions from all case studies.

Blog

Reflections on the impact of the Learning Layers project – Part Three: The use of Learning Toolbox in new contexts

With my two latest posts I have started a series of blogs that report on the discussions of former partners of the Learning Layers (LL) project on the impact of our work. As I have told earlier, the discussion started, when I published a blog post on the use of Learning Toolbox (LTB)  in the training centre Bau-ABC to support independent learning while the centre is closed. This triggered a discussion, how the digital toolset Learning Toolbox – a key result from our EU-funded R&D project – is being used in other contexts. And – as I also told earlier – this gave rise to the initiative  of the leader of the Learning Layers consortium to collect such experiences and to start a joint reflection on the impact of our work. In the first post I gave an overview of this process of preparing a joint paper. In the second post I presented the main points that I and my co-author Gilbert Peffer presented on the use of LTB to support vocational and workplace-based learning in the construction sector. In this post I try to give insights into the use of LTB in other contexts based on spin-off innovations and on refocusing the use of the toolset. Firstly I will focus on the development of ePosters (powered by LTB) in different conferences. Secondly I will give a brief picture on the use of LTB for knowledge sharing in the healthcare sector.

Insights into the development of ePosters powered by LTB

Here I do not wish to repeat the picture of the evolution of the ePosters – as a spin-off innovation of the LTB as it has been delivered by the responsible co-authors. Instead, I try to give firstly my impressions of the initial phase of this innovative use of LTB to support poster presenters in conferences. Then, I will give a glimpse, how we tried to present the ePoster approach to the European Conference on Educational Research and to the VETNET network. Here I can refer to my blog posts of that time. Then I will add some information on the current phase of developing the work with ePosters – as presented by the responsible authors for the joint paper on the impact of LL tools.

  • In October 2017 I became familiar with the breakthrough experience that the developers of the LTB and the coordinator of the healthcare pilot of the LL project had had with the development of ePosters for conferences. In the annual conference of medical educators (AMEE 2017) they had introduced the ePosters (prepared as LTB stacks) as alternatives for traditional paper posters and for expensive digital posters. At that time I published an introductory blog post – mainly based on their texts  and pictures. Foe me, this was a great start to be followed by others. Especially the use of poster cubicles to present  mini-posters that provided links to the full ePosters was very impressive. Another interesting format was the use of ePosters attached to Round Tables or Poster Arenas was interesting.

In the year 2018 we from ITB together with the LTB-developers and with the coordinator of the VETNET network took the initiative to bring the use of ePosters into the European Conference on Educational Research 2018 in Bolzano/ Bozen, Italy. We initiated a network project of the VETNET network (for research in vocational education and training) to serve as a pioneering showcase for the entire ECER community. In this context we invited all poster presenters of the VETNET program to prepare ePosters and the LTB-developers provided instructions and tutoring for them. Finally, at the conference, we had the ePoster session and a special session to e approach for other networks. This process was documented by two blog posts – on September 2nd and on September 11th – and by a detailed report for the European Educational Reseaarch Association. The LTB-stacks stacks for the ePosters can be found here, below you have screenshots of the respective web page.

In the light of the above the picture that the promoters of ePosters have presented now is amazing.  The first pilot was with a large, international medical education conference in 2017. In 2018 it was used at 6 conferences across Europe. In 2019 this number grew to 14 and also included US conferences. The forecast for 2020 is that it will be used by more than 30 conferences with growth in the US being particularly strong.  The  feedback from users and the number of returning customers  suggest that the solution is valued by the stakeholders.

Insights into the use of LTB in the healthcare sector

Here I am relying on the information that has been provided by the coordinator of the healthcare pilot of the Learning Layers and by the former partners from the healthcare sector. Therefore, I do not want to go into details. However, it is interesting to see, how the use of LTB has been repurposed to support knowledge sharing between the healthcare services across a wide region. This is what the colleagues have told us of the use of LTB:

“LTB has been used to create stacks for each practice and thereby improve the accessibility of the practice reports as well as to enable the sharing of additional resources which could not be included in the main report due to space. The app has thus improved the range of information that can be shared, and links are also shared which allow users to read more in-depth into the topic areas. The use of LTB has also enabled the spread of information more widely, as the team suggested that the stack poster (a paper-based poster displaying the link to the stack and a QR code) should be displayed in the practice to allow any interested staff to access the stack and resources. The use of the stack also allows for all the information to be kept by interested staff in one central place, so previous reports and resources can be referred back to at any point. It can also be accessed via a personal mobile device, so gives the opportunity for users to access the information at the most convenient time for them, and without the need to have the paper report or to log in to a system.”

I think that this is enough of the parallel developments in using the LTB after the end of the LL project and alongside the follow-up in the construction sector. The final post of this series will discuss some points that have supported the sustainability of the innovation and contributed to the wider use of the LTB.

Blog

Reflections on the impact of the Learning Layers project – Part Two: The use of Learning Toolbox in vocational learning and construction work

With my latest post I started a series of blogs that report on the discussions of former partners of the Learning Layers (LL) project on the impact of our work. This was triggered by reports  that the key result of our work – the Learning Toolbox – is being used in the original pilot context (training for construction work) and is getting new users. In particular this discussion was inspired by the fact that such tools gain new importance in the period of corona crisis, when schools and training centres are closed and traditional conferences are being cancelled. In my previous blog I gave a brief overview on the discussions that we have had and on the joint paper that we have been preparing. In this blog I will summarise some key points that I and my co-author Gilbert Peffer have raised on the case that we have presented – the use of Learning Toolbox (LTB) in the training centre Bau-ABC Rostrup. Below I will use our draft text (that was shaped as responses to given questions) as a slightly edited version.

The pioneering Case: Learning Toolbox in the training centre Bau-ABC Rostrup

The Learning Toolbox was developed in the Learning Layers project as a response to the needs of the training centre Bau-ABC Rostrup (a major application partner from the construction sector). The initial design idea referred to digitisation of training materials, instruction sheets, project reporting sheets and self-assessment procedures. However, in the course of  iterative co-design cycles, the process took the course towards shaping an interactive toolset to support training and learning activities.

What particular problems were addressed in the co-design process?

In Bau-ABC Rostrup the apprentices spend relatively short periods (one or two weeks at a time) and are trained by full-time trainers who are Meisters (master craftsmen) in their trade. During each period they complete a project in the respective trade. Then, they move back to their companies or have another training period in a supporting trade. In general, the projects are based on genuine work tasks that are implemented in a workshop or at outdoor training areas.

Previously, the instructions for the apprentices’ projects had been provided orally with the help of instructive worksheets (for preparing the project plans). Likewise, the reporting on the projects was done manually. In principle, the project cycle was based on self-organised learning – independent search for knowledge resources, drafting the plan plan, reporting the implementation and then assessing the outcome. The functionality of Learning Toolbox – based on trade-specific stacks that consisted of different tiles – provided support for learning when completing the work tasks.

Stakeholders who have been involved in the co-design process and pilot activities

The co-design work was carried out as a collaborative process by researchers, technical partners and full-time trainers from Bau-ABC. During an earlier phase of the work the project team provided basic multimedia training for some voluntary trainers. At a later phase the project team and these trainers provided an intensive training campaign for all trainers of the training centre. In the pilot testing of the Learning Toolbox a core group of trainers introduced the toolset in their training and results were monitored by the project team. Also, at the final phase of the project, the use of the Learning Toolbox as support for construction work processes was demonstrated for several craft trade companies. As a result, follow-up processes (feasibility studies and project initiatives) were started with some companies.

How have the training practices been changed and what new practices have emerged?

The functionality of the Learning Toolbox was easy to be customised for different training purposes and according to the pedagogic priorities of the trainers. Thus, it made it easier for the trainers to emphasise independent searches among a wide range of web resources. (This was essential for borehole builders who were working alone on remote construction sites). Also, it made it possible to give learners a gradual access to a wider range of resources (and to solutions of their peers) once they had learned to develop their own solutions to the project tasks. (This was essential for the road-builders and pipeline-builders.) Moreover, apprentices were encouraged to document their projects with the Learning Toolbox. This enabled the instructors to see progress of their apprentices in real time and provide more timely feedback. The LTB has also strengthened the self-organisation of the instructors in terms of streamlining their content and sharing common resources between the different professions. While this approach to collaborative training was already there at Bau-ABC, the LTB offered a further channel to systematise this practice. Altogether, the co-design process has been characterised by a continuing research & development dialogue that has been underpinned by the accompanying research approach of the research institute ITB, University of Bremen.

What has been the impact so far and what can be expected in the near future? 

After the project the use of the Learning Toolbox was spread across all trades in which Bau-ABC Rostrup provides apprentice training. Consequently, the apprentices have started to complete their projects with the help of the Learning Toolbox. Based on this pioneering case, other German training centres in the construction sector are in the process of adopting the Learning Toolbox both for initial VET and for continuing VET. There are also teacher groups at a number of medical faculties in Germany who have adopted the LTB for practice training. Due to the closure of the training centres because of the COVID19-epidemic the trainers of Bau-ABC Rostrup have prepared trade-specific stacks with the Learning Toolbox to support independent learning.

What have been key aspects for sustaining this initiative so long after the project 

Altogether, the co-design process, the piloting phase and the follow-up phase have been characterised by intensive research & development dialogue (underpinned by an accompanying a research approach that dovetails with the co-design process), adjustment of the tool development to the pedagogic approach of the trainers and to the effort to promote self-organised learning of apprentices. In addition, the project work and the follow-up has been characterised by strong support from the accompanying researchers of ITB. Furthermore, the trainers of Bau-ABC have become strong multipliers of innovation both within their organisation and in their networking with other training centres and partner companies. At the end of the project it was not certain, how the innovations could be sustained and spread. In the construction sector it was essential that the developers of the Learning Toolbox and the accompanying researchers from ITB took several initiatives to launch follow-up activities with construction companies.

I think this is enough on this case study. The next post will give insights into other cases that were explored in our discussions.

Blog

Reflections on the impact of the Learning Layers project – Part One: New discussions in the project consortium

Three weeks ago I published a blog post in which I reported on the use of the Learning Toolbox (LTB) to support vocational learning during the corona crisis (see my previous post). I shared it on the mailing list of the partners of the former Learning Layers project consortium. As an immediate reaction some partners from the UK healthcare sector informed, how they have made wide use of LTB among general practice (GP) units for sharing knowledge on the patterns to prescribe certain medications. Also, this exchange of messages brought into picture the growing use of LTB as support for e-posters (see my previous post).

This gave rise to the initiative of Tobias Ley, the leader of the former Learning Layers consortium, to report on such sustainable use of Learning Layers tools after the end of the project in a conference paper. And this led to a rapid process of collaborative writing that involved several research partners of the former consortium. The results are now being finalised and will be presented in the respective conference (provided that the proposal will be accepted). Therefore, it would be premature to discuss our findings in toto before the submission has been reviewed and accepted. However, I think that it is appropriate to discuss some of the cases that were examined in this discussion and some lessons that I and my co-author Gilbert Peffer have highlighted in our contributions to this process.

Altogether, this has been an interesting collaborative reflection process that brought together several partners that have been working with the two pilot sectors of the project (construction and healthcare). Also, it has given us a fresh picture on the development of the ePosters (powered by LTB) as a spin-off innovation emerging from the Learning Layers project. So, in my next posts I will discuss different topics that were taken up in our joint discussions.

Blog, Taccle VET (IO4)

Online learning during the corona crisis – The contribution of the Learning Toolbox

In my latest blog I made the point that nowadays – due to the corona-crisis – the education and training providers have to start delivering their teaching and training online. This is no longer something as add-on to the ‘ordinary’ teaching and training. And as I mentioned, this challenge is being taken in rapid tempo – and it seems to push the developers to new innovations. Since I have been recently travelling, I have not been able to follow all relevant developments. Therefore, I need to catch up with my colleagues who are better informed. However, already at this point I can refer to inspiring news on the use of the Learning Toolbox (LTB) as support for vocational learning – also during the period of lockdown.

Learning Toolbox (LTB) as shared digital toolset for trainers and apprentices

As regular readers of my blogs surely know, the Learning Toolbox (LTB) was developed in the context of our EU-funded project Learning Layers (2013 – 2017). After a lengthy co-design process the project partners managed to develop and pilot test a digital toolset to support vocational and workplace-based learning. In our major pilot context, the North-German training centre Bau-ABC Rostrup, the full-time trainers have continued to use the toolset and spread it across all construction trades (for which they give training). As we have seen it during the project and afterwards, the LTB has proven to be user-friendly – both from the perspective of trainers and apprentices. Moreover, it has served the purpose to support self-organised learning and professional growth in the respective trades.

Use of Learning Toolbox (LTB) during the period of lockdown

So far our observations on the use of LTB have been based on working visits to Bau-ABC during the normal training periods when the full-time trainers have supervised the apprentices’ projects. Now, during the crisis, the training centre has been closed and the training periods have been postponed. However, the trainers have not capitulated. Instead, they have prepared special LTB-stacks for the closure period and announced them via Facebook. Below, some screenshots will give an impression, how vocational learning contents have been shared with apprentices.

Screenshots 1a and 1b: The general announcement on the LTB-stacks for different trades

Screenshots 2a and 2b: Trade-specific LTB-stacks with attached introductory messages

At this point I will not go into details, in what ways the trainers expect that these stacks will be used – after all, no one knows, when and how the return to some kind of new normality can take place. Nevertheless, the Bau-ABC trainers have shown that the LTB has proven to be a valuable toolset in supporting the training and learning processes during the crisis. I will try to catch up with the LTB-developers, the Bau-ABC trainers and other experts to learn more during the coming weeks.

Blog

Quiet period in education and training activities – What news on the project fronts?

Normally I am populating this blog with reports on field visits and project meetings or on emerging results. Right now we are in the middle of a very quiet period. The hitherto normal activities of education and training providers have been closed due to the spread of the corona virus. And in a similar way all face-to-face meetings – whether project meetings, field visits or workshops with local/regional partners – all such events have been cancelled or postponed. So, it is very quiet right now. But yet, it is worthwhile to look at the possibilities that digital tools and online services may provide under such circumstances.

Indeed, as Graham Attwell mentioned in the online meeting of our TACCLE4 CPD last week, this crisis has been a strong push for teachers and trainers to move their activities online. What has been so far considered as a sideline opportunity – something complementary to the ‘regular’ teaching and training in presence – has to be considered as the remaining main option. From this point of view teachers, trainers and university lecturers are making rapid progress in implementing new online learning solutions in their own context. And at the same time developers of online learning platforms and software solutions are doing their best to support such transitions. All this is reflected in many online conferences and meetings. So, even during this quiet period, there are several new developments that need our attention.

From this point of view we discussed the role of our next transnational meeting – which we cannot organise as a face-to-face meeting but as an online meeting. Nevertheless, we agreed to book time slots to catch up with these new developments in online learning and in knowledge sharing within online communities. Also, we discussed the prospects to organise the forthcoming Multiplier events of the project as online events (and to use new formats for such events). Here, we need some time for further planning. BUT, if we want to capture the most valuable fruits of the new developments, we would need to organise the events at a time when our target groups – teachers and trainers – are getting back to the new normality after the period of lockdown. Therefore, I hope that the funding agencies are flexible enough to extend the working periods of projects like ours.

At any rate, I am trying to bring myself back to working mode (at least after the Easter period) and catch up with my friends and colleagues who are closer to new developments. Let us see, what all we will find out.

Blog

Ideas for the forthcoming Multiplier Event of the TACCLE4 CPD project – bringing Learning Toolbox and OER into practice

In my previous post (on the Pontydysgu site) I told that I will be travelling quite a while and get back to office at the end of May. But I also mentioned that we (me together with my colleagues Ludger Deitmer and Jan Naumann) are planning a Multiplier Event on using digital tools to enrich vocational learning culture. And we will be working together to develop our ideas further. Here I have put on paper our first ideas:

1. What kind of event are we planning?

We are planning a Bremen-based and German-speaking Multiplier Event of the TACCLE4 CPD project to be hosted by ITB on Friday 12th June 2020.

2. What is the title of the event? What is our key message?

“Digitale Wege in der beruflichen Bildung – Alibi-Ansätze oder Innovationen”

With this provocative title we want to stimulate critical discussion on halfway-thought reforms around digitization in the field of VET. As a contrast we want to give insights into practitioner-led innovations in vocational learning.

3. What kind of an event do we want to have and with whom?

We want to have an event for and with VET practitioners. We want to invite them to think of their own possibilities to shape new learning arrangements with digital toolsets (e.g. with Learning Toolbox) and open educational resources (e.g. with such learning designs that Jan has presented in the OER-report for TACCLE4 CPD).

As participants we want to invite teachers (from vocational schools) and trainers (from training centres) of whom we know that they

  1. have an interest in enhancing their digital competences and
  2. want to develop vocational learning with digital toolsets and OER.

In this respect we want to give them inspiring impulses and opportunities for hands-on training in terms of peer-to-peer support.

4. What contents for discussion and training have we considered?

From the perspective of TACCLE4 CPD project we discussed two main perspectives:

  • Use of Learning Toolbox as means to enhance vocational and workplace-based learning culture – in particular from the point of self-organised learning.
  • Use of Open Educational Resources (OER) as support for shaping-oriented learning and for combining different learning paths.

From the perspective of TACCLE AI and VET project we discussed some further perspectives that could be taken up:

  • The shaping of “Smart factory” competence centres in vocational schools and their contribution to the development of vocational learning culture.
  • The use of humanoid robots as “assistants” to teachers in large classes with  heterogeneous learners and diverse support needs.

5. What further ideas we want to emphasise in the event?

Promoting the readiness of participants to work with new tools:

  • Tools with which they can co-shape their own teaching/learning arrangements;
  • Tools that they can develop themselves and use in their teaching and learning.

Create an understanding for the unity of culture, structures and technology in order to achieve sustainable innovations in VET:

  • Culture – to bring into picture and spread the innovative spirit to develop learning and to engage colleagues and learners;
  • Structures – to ensure the acceptance of the new ideas and the readiness of the whole organisation to support new initiatives;
  • Technology – to use appropriate technology for working and learning tasks.

(Points from the perspective of unsuccessful practice:

  • You may have inspired teachers but if the structures do not provide any flexibility, the innovations remain isolated.
  • You may have up-to-date technologies, but if they are not linked to the learning culture, their potentials are not in full use.
  • You may have supportive structures and adequate technologies, but if teachers are not able/willing to take initiatives, the innovations do not take off.)

Provide insights into new learning concepts (enriched with digital tools and digital media) and how to work with them:

  • Micro-learning (adjusted to vocational and workplace learning with major time constraints)
  • Nuggets with max. 5 minutes digital media content to capture the concentration of learners and to stimulate further learning.

I guess this is enough for the moment. I will get back to this topic in due time.